Skins are an item of equipment were the old adage of "buy once buy right" really applies and that's we only stock the COLLTEX CLARIDEN WHIZZ SKINS

Launched in 14/15, the Colltex Clariden with Whizz acrylate adhesive was the first ski climbing skin which doesn't need a sheet between the skins to stop them sticking together. You simply stick them sticky side to sticky side and fold them up which is faster and much safer when in precarious positions. And eventually when the skin needs regluing, unlike regular skin adhesive which are very difficult/messy to remove prior to re-gluing, the acrylate Whizz glue is available on a roll which is simply re-applied over the old glue.
Mixed fibre skins are the best type to use as they're most suited to conditions where snow temperatues can vary greatly, making them especially suitable for European snow conditions. Whilst modern nylon skins may glide as well as mohair & mixed fibre skins they tend to have serious problems with balling up when used in wetter snow conditions in places such as Europe. The mixed fibre Colltex skins are the intelligent choice for ski tourers & ski mountaineers wanting reliable performance in a range of snow conditions & temperatures.
Colltex's Mix skins are a perfect combination of 65% mohair & 35% polyamid synthetic fibres to give superb gliding properties & excellent durability so you get effortless climbing & excellent durability to give many years of service. They are the perfect choice for the all round backcountry skier & expeditionist demanding performance & versatility from their equipment.

And Colltex's NR41 metal tip loop and market leading camlock tail fitting system is the best on the market.

The skins are 1.85m long & come in widths of 130mm & 140mm for trimming to fit your skis perfectly. Select the width of your skins based upon the maximum width of your skis at the tip.

Fitting instructions & a trimming tool are included in the kit but if you need any help go to the Colltex channel on YouTube & you'll find a series of excellent of videos on fitting, use, maintenance & re-gluing etc:
Whilst the Colltex skins are straightforward to cut/fit Jon also offers a fitting service at a cost of £30.00 (only offered on skins purchased from The Piste Office).

WhitedotscottKinkovistDynafitQuiver killerPM GearColltex zardoz wax